Our research, tests and development have one aim: supplying our customers with better products for even more efficient handling.
INNOVATIONS
Hi-Load SCRAIL®:
FOR AUTOMATION AND VAST HOLDING POWER
The brand-new Hi-Load SCRAIL® represents a further step in collated
fastener evolution. It combines the usability in automation with the superior
holding power of SCRAIL® Fasteners.
A strong partner for every challenge: Hi-Load SCRAIL® Fasteners are available in 15° wire coil and 15° plastic sheet coil for your convenience.
FASCO® nailing head compatible:
Use the advantages of a end-to-end system. Hi-Load SCRAIL® is entirely compatible with FASCO nailing heads 1)(HEAD CN-55 and HEAD CN-90A) for stationary industrial nailing applications
1) and heads from other manufacturers
TECHNICAL DATA:
Material:
Standard Steel
Finish:
• electro galvanized - for INTERIOR applications 1)
• FasCoat® finish, available upon request - for EXTERIOR applications 2)
Dimension:
Length: 40 - 75mm
Diameter (inner / outer): 2,8 / 3,1 mm
Collation:
• 15° Plastic Sheet Coil
• 15° Wire Coil
Thread:
fine thread, coarse thread,
Drive:
Torx,
Individual lengths and materials available upon request!
1) also moderate exterior corrosion protection
2) except extreme salinity and humidity conditions
SubLoc® SCRAIL®:
FOR SUBFLOOR APPLICATIONS
What are the features of good subflooring? It does not squeak, takes a lot of strain and – most important – installs quickly. SubLoc® SCRAIL® fullfills all three requirements with ease.
STRONGER than nails: SubLoc® SCRAIL® is coated with a especially developed adhesive, which provides dramatically improved holding power vs. ring shank nails.
The fine threads ensure adjustment of the SubLoc® SCRAIL® after being driven in, which in turn greatly reduces squeaking.
FASTER than screws: SubLoc® SCRAIL® can be driven with most common pneumatic nailers.
This fact ensures a performance that is at least twice as fast as collated screws and eight time faster than bulk screws.
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
TECHNICAL DATA:
Material:
Standard Steel
Finish:
• electro galvanized - for INTERIOR applications 1)
• FasCoat® - for EXTERIOR applications 2)
Dimension:
Length: 57 mm
Diameter (inner / outer): 2,8 / 3,1 mm
Collation:
• 20° + 34° Plastic Sheet Coil
• 15° Wire Coil
Thread:
fine thread
Drive:
Versa (combination of Phillips & Square)
Individual lengths and materials available upon request!
1) also moderate exterior corrosion protection
2) except extreme salinity and humidity conditions
INVISIDECK® Hidden SCRAIL® SYSTEM
Hidden fastening systems have become an essential part of state-of-the-art deck building. The INVISIDECK® Hidden SCRAIL® SYSTEM is the most time-saving way to achieve your own stylish deck!
While with conventional hidden fastening systems, every single screw has to be driven in laboriously, you will build your deck up to 5 x faster when using the INVISIDECK® SCRAIL®fastener and the new INVISIDECK® installation tool - and at the same time - you will save a lot of money.
The benefits of the INVISIDECK® Hidden SCRAIL® SYSTEM at a glance:
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
Improves the appearance and value of the deck.
Easily installed, quickly removable.
Saves time and labour cost.
Fits many grooved boards on the market.
Adaptable to non-grooved boards both composite and exotic hardwoods
with INVISIDECK® Groove Cutter.
Installs I-CLP CLIPS 3-5 times faster with the INVISIDECK® Installation Tool than conventional installation.
3 COMPONENTS FOR DECK ENHANCEMENT
INVISIDECK® I-CLP CLIP
Heavy gauge stainless steel fastener for use in 25 mm or thicker pre-grooved decking or non- grooved Boards with INVISIDECK®Groove Cutter.
INVISIDECK® SCRAIL®
34° Strip collated SCRAIL® Nail Screw Fastener for use with the INVISIDECK®
Installation Tool. 2.8/3.2 x 38 mm, fine threads,
Phillips Head,
FasCoat® black painted, compatible with ACQ.
INVISIDECK® #F36 RHN33-38 DT
Installation Tool with patent pending
nose. Designed to hold
INVISIDECK® I-CLP CLIP.
To learn more, watch this video:
SteelThread SCRAIL®:
A REVOLUTION IN LIGHT GAUGE STEEL
CONSTRUCTION
Wherever metal support joists are taken as an underlayment – whether it is light gauge steel construction, dry walling or deck installation - the SteelThread SCRAIL® circumvents the arduous and cumbersome efforts usually involved in fastening screws.
The SteelThread SCRAIL® is shot in like a collated nail with a pneumatic gun to connect gypsum or wood with steel.
The patent pending thread provides an excellent holding power in steel studs ranging from a thickness of 0.5 to 1.6 mm and allows easy removal or adjustment afterwards, without damaging the material. Profit from the enormous time saving that SteelThread SCRAIL® offer you for light gauge steel construction, dry walling or deck building!
SteelThread SCRAIL® specifications:
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
Dimensions:
Lengths : 25 - 65 mm
Diameter (inner / outer): 2.5/2.8 mm - 2.8/3.2 mm
Collation Type:
15° Plastic Sheet Coil
Thread:
SteelThread (patent pending)
Bit:
phillips, torx (star)
Material specifications:
Deck board thickness:
9.5 - 25 mm (gypsum board or wood)
Steel stud thickness:
0.5 - 1.6 mm
For support joists with a thickness of up to 2.0 mm a special SteelThread SCRAIL® is available upon request.
PLASTIC SHEET MINI-SCRAIL®
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
The new lengths of the Mini-SCRAIL® version range from 22 to 50 mm.
Lengths:
22 - 50 mm
Finishes:
electro-galvanized, FasCoat®, stainless 1.4301/1.4401 and painted
Thread:
fine
Bit:
philips, pozi, torx
Head types:
PAN head, countersunk head
Collation type:
15° Plastic Sheet Mini-Scrail
Suitable tools:
FASCO Mini-Coil SCRAILER F33 CN15W-PS50 SCR
26° ANGLE BRADS Ø 1.2 mm (18 gauge)
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
26° angle brads with a diameter of 1.2 mm (18 gauge):
Standard lengths:
25 mm + 32 mm + 38 mm + 45 mm + 50 mm
Finish:
electro-galvanized
Applications:
furniture (drawers, casebacks), trims, windows & doors, picture frames, exhibition stands, shoe industry, upholstery, automobile interior equipment, etc.
Special lengths are available upon request!
CLIPPED HEAD & OFFSET PAPER TAPE STRIP
NAILS IN STAINLESS STEEL
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
In addition to bright, electro-galvanized and hot dipped, we now offer clipped head and offset paper tape strip nails in stainless quality also:
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
The Eljif staple is a flat wire staple that is used in the packaging industry.
It mainly serves as a splint for protective bags that have to bear heavy weight
(e.g. Jiffy protective bags).
Benefits of staples versus adhesion:
Very fast closure with the ELJIF splint tool
Prevent pilferage: Packaging cannot be opened without being noticed
Closure resists high loads and extreme weather conditions
TWISTED (JUMBO) NAILS
WITH
DIFFERENT PITCH
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
The special shank type (twisting) lowers the resistance of the nail when it is driven in. This reduced effort saves time and energy.
Lenghts:
100 - 160 mm
Collation types:
• 20° + 34° Plastic Strip Nails
• 0° Plastic Sheet Coil Nails
Ø Shank
—>
Pitch
3.8 mm
—>
80 mm/rev.
4.2 mm
—>
100 mm/rev.
4.6 mm
—>
125 mm/rev.
CONSTRUCTION STAPLE UP TO 150mm (6'')
WITH SUPPORT TAPE FOR MORE STABILITY
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
Applications:
For fixation of structural insulated wall panels on wooden constructions, for attaching fibreboards and wood-wool slabs up to 150 mm (6”)
Lengths:
from a leg length of 75 to 150 mm (3'' - 5'')
Finishes:
electro-galvanized and stainless 1.4301/1.4401
Suitable tools:
Haubold PN29150D, Haubold PN29130D und
Senco HB110SP
NEU! 14g staples are now produced with support tape in order to add strength and stability to support the staple strip.
BECKDECK® DOUBLE THREADED SCRAIL®
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
The BeckDeck® SCRAIL® is a nail screw fastener with an especially developed double thread.
It prevents unsightly mushrooming that can occur when a fastener is driven into composite material.
Applications:
floors, fences, railings
Collation Types:
Plastic Strip SCRAIL® and Wire Coil SCRAIL®
Finishes:
bright, electro-galvanized and FasCoat®
Colours:
available in more than 2,000 colours
We recommend the BeckDeck® SCRAILl® with FasCoat® coating to obtain the best possible corrosion resistance (holds up to 3,000 hours and more until the first signs of red rust appear with the salt spray test in accordance with ASTM B117 and ISO 3231).
BRADS & PINS IN COMBO PACKS
Ideal for covering DIY requirements! Combo Packs contain the most common brad & pin diameters in various lengths and offer you and your customers the following advantages:
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
Different lengths can be offered in smaller quantities.
Shelf-friendly for the retail trade through manageable display cartons containing 12 packs each.
Combo Packs are also available with stainless brads/pins (stainless 1.4301).
Available dimensions:
Ø 1.6 mm brads:
Lengths: 25 + 32 + 38 + 50 mm
Ø 1.2 mm brads:
Lengths: 25 + 32 + 38 + 50 mm
Ø 0.6 mm pins:
Lengths: 19 + 32 + 35 + 50 mm
Emphasise your trade mark! We will be glad to manufacture combo packs in your corporate design!
FASCOAT® FINISH
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
FasCoat® is an especially developed coating that provides an extreme corrosion protection. Designed for almost all outdoor applications except for coastal areas with high salinity.
Holds up to 3,000 hours and more until the first signs of red rust appear in the salt spray test according to ASTM B117 and ISO 3231.
Especially developed for SCRAIL® when used outdoors.
Environmentally friendly! Our green solution without any ammonia or hexavalent chromium.
PAPER TAPE ANKER NAILS
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
Collation type:
34° Paper Tape
Lengths:
40 - 60 mm ( 1 5/8'' - 2 3/8'')
Shank diameter:
4.0 mm (.157'')
Finishes:
standard steel, electro-galvanized, hot dipped
Applications:
metal to wood connections (e.g. angle joints and joist hangers with roof trusses and manufactured housing)
With approval for 40 mm, 50 mm and 60 mm (1 5/8”, 2”, 2 3/8”) in ring electro-galvanized and ring hot dipped.
23g MICROBRADS
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
23g Micro Brads designed with small heads ensure better holding power in cabinets and other work pieces.
Diameter:
0.6 mm
Lengths:
from 40 - 60 mm (1 5/8'' to 2 3/8'')
Finishes:
bright and stainless 1.4301/1.4401
Applications:
outdoor furniture, upholstery, picture frames, trims, doors & windows etc.
Suitable Tools:
Fasco F23 A64, Grex P645 & P635, Cadex CPB23.35 & CPB23.50, Senco Finish Pro11 and other tools common on the market
PAINTED SCRAIL® FOR DECKING,
FENCING AND RAILING
Für den Inhalt dieser Seite ist eine neuere Version von Adobe Flash Player erforderlich.
The SCRAIL® nail screw fastener is also available in the two basic colours Saddle Brown & Winchester Grey to optimally fit in the general picture of your deck.
With larger quantities you can choose the colour of the SCRAIL® yourself.
A selection of more than 2,000 colours is at your disposal for this purpose.